Login Pop-up

+962 6 585 21 21 Login
Study To Install Underfloor Heating

Study To Install Underfloor Heating

Underfloor heating is turning into increasingly popular. In Scandinavia, around 80 per cent of homes are warmed utilizing this type of heating system, and coverage in the UK can be rising quickly.

In consequence more electricians will be tasked with putting in electric underfloor heating. While this may be daunting if it is something you have got never carried out earlier than, the installation process is fairly straightforward.

The following pointers will allow you to set up the heating system

Check the sub-floor
Before installing any kind of underfloor heating system, you must check the type of sub-floor the system is to lie on top of.

If there is a concrete sub-floor, you will have to put insulation board in place, before you lay the heating system.

Without the insulation board, the cold concrete will be heated first, which can dramatically affect the output of the system.

If there is a timber sub-floor, there will not be the same kind of have an effect on, but you may need to put tile backer board in place, before laying the heating system.

Making certain the sub-floor is insulated will assist your underfloor heating system work at maximum efficiency.

Select the system
There are various types of underfloor heating available, and the one that is greatest for you will rely upon many factors. These embrace the sub-floor, the floor covering and simply personal preference.

You might wish to install an in-screed cable. This is typically installed in new-build houses or extensions, as it housed within the screed - an integral part of the floor.

After all, this option just isn't practical if you are putting in the heating system under an current floor.

In this case, chances are you'll wish to use a heating mat or a versatile element.

A heating mat is the perfect selection in case you have tile, stone of slate flooring. It heats up very quickly and the heat transference to these materials is high.

If you have laminate or timber flooring, chances are you'll wish to consider a versatile heating element. This could be very thin and might be laid directly under the flooring, without elevating the floor.

Set up
While laying the underfloor heating system is pretty easy and could be accomplished by anybody with some DIY expertise, the ultimate connection must be carried out by a certified electrician.

They will also be able to approve the installation and, if required, test the system.

Once put in, electric underfloor heating needs very little maintenance. There are not any moving parts to corrode - so you need to expect a lifespan of between 15 and 30 years.

Should you beloved this informative article along with you would want to acquire more information about mata grzewcza pod panele generously visit our web page.

Elf Energy International Jordan,
Amman, 7th Circle-314
T +962 6 585 11 21
Fax +962 6 585 21 21
Email: info@elf-energy.com
Skype: elf.energy

Scroll to top